How to daily maintain the hottest packaging machin

  • Detail

How to carry out daily maintenance of the packaging machine

the packaging machine and equipment must be operated by fixed personnel, who can skillfully master the startup and bag making procedures, and can easily debug the instrument, change parameters, etc; The mechanical instrument commissioning personnel must be strict with Yujie manufacturer, and be able to master the instrument performance, working procedure, operation mode, working state, common fault troubleshooting and handling; It is strictly forbidden to operate computer instruments without permission. Daily maintenance must ensure that the inside and outside of the computer instrument box are clean and dry; Regularly check that the wiring terminal is not loose or detached, which will affect the overall use effect of the equipment. Ensure that the circuit and gas circuit are unblocked

basic cleaning includes: 1 After shutdown, the metering part should be cleaned in time, such as sugar, isatis root granules, salt, etc. it is necessary to ensure that the blanking plate and rotary table are cleaned every shift to prevent corrosion. "2. For the heat sealer body, it should be cleaned frequently to ensure that the texture of the seal is clear. 3. The photoelectric tracking light-emitting then developed a 7178-t6 alloy head with higher intensity, that is, the electric eye, which should also be cleaned regularly to ensure the small error of cursor tracking. 4. The scattered materials on the tray should be cleaned in time to keep the parts clean. 5. The dust in the electric control box should be cleaned regularly to prevent poor contact and other faults. The newly installed machinery must be cleaned within one week of use." Check and tighten the transmission and moving parts, and add oil for maintenance; After that, it must be checked and maintained regularly every month; Basic maintenance: 1. Regularly check the screws at all parts of the packaging machine to avoid loosening. 2. Pay attention to the waterproof, moisture proof, anti-corrosion and rat proof of electrical parts. The electric cabinet and wiring terminals should be kept clean to prevent electrical failure. 3. When stopping the machine, the two heat sealing rollers should be in the open position to prevent scalding the packaging materials. 4. Regularly fill the gear mesh, bearing oil injection hole with seat and moving parts of the packaging machine with engine oil for lubrication. When filling the lubricating oil, please be careful not to drop the oil on the drive belt, so as to prevent slipping, loss of rotation or aging and damage of the belt

Copyright © 2011 JIN SHI